Create an account on the HP Community to personalize your profile and ask a question
11-09-2019 05:17 PM
Product: HP Z400 Workstation
Operating System: Microsoft Windows 10 (64-bit)
Hello I just recently bought this gaming pc about 10 days ago. The specs are the following Intel xeon w3680 8 gb ram 1tb HDD 128GB SSD RX 580 I wanted to change my processor because i didnt like the xeon series and in the start it was overheating then solved by updating the drivers. Today i downloaded HeavyLoad to stress test my cpu and ran it for around 6 hours and when i came back i saw my pc showing blue light but it didnt start so i replugged it and then the cpu started showing red light followed by a beep and after every 6 beeps it took a pause and then again 6 beeps.
1 REPLY 1
11-10-2019 04:28 AM
Depending on the Age/Vendor of the BIOS.
Power button LED blinks 6 times with 6 beeps
Video Card or Graphics
Reset the graphics card (if applicable). If the problem is not resolved, remove other accessory cards, and replace the graphics card or Main-Board.
LED blinks 6 times
BIOS authentication failure.
Restore BIOS if available.
Press the Windows + B keys to do a BIOS recovery or replace the Main-Board.
Something else, but start with the above.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community