-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Business Notebooks
- Thunderbolt G2 230w dock disables ethernet upon 'auto reboot...

Create an account on the HP Community to personalize your profile and ask a question
08-22-2020 09:08 PM
All,
I am having an issue when my laptop performs an auto reboot where it disables the ethernet on my G2 thunderbolt dock. This occurs during windows updates and also when my backup software auto shuts down.
It seems to disable the Thunderbolt driver, requiring me to hard reset the unit by removing the battery.
the wifi adaptor seems ok, and if I plug the ethernet cable directly into the ZBook is fine also.
Is there a configuration item for the Thunderbolt dock that i am missing here?
Thanks in advance
SG
08-24-2020 05:01 PM
There are setting in the BIOS that relate to Thunderbolt. I had a situation where my Thunderbolt 3 device (an audio interface) would not come back up after the system went to sleep or if the device was disconnected and then reconnected later.
I was able to resolve the issue by changing BIOS settings. I believe it was the 'Thunderbolt Security Level'. That setting, or one of the other Thunderbolt settings improve the situation.
08-24-2020 05:05 PM
Just saw this thread that also speaks about the dock and BIOS settings for the win.
08-28-2020 08:57 PM - edited 08-28-2020 09:01 PM
Have changed the settings twice...from "no security" to "pcie...blah blah" Still having the same issue, Lan is disabled upon reboot. Any more ideas? Cheers..PS, i do not seem to have the "legacy power" options as described in one of the suggested solutions. This is a ZBook 17 G4, Intel(R) Xeon(R) CPU E3-1535M v6 @ 3.10GHz, BIOS is P70 Ver. 01.34