Create an account on the HP Community to personalize your profile and ask a question
01-04-2018 11:28 AM
I am having a problem since the RS3 update, I cannot boot into Windows with lid shut while connected on Thunderbolt 3 dock, I have to open the lid, power on the notebook, and then close it after boot. Windows restarts straight away, no BSoD, nothing, drivers and firmwares are latest.
Is anyone expieriencing similiar problems? It´s really frustrating.
07-26-2018 09:48 AM
What kind of montors is connected?
Have one workplace with similar issues. In that instance it does BSOD but you'll not notice it as the display is blank and it autoreboots, the second time it boots ok though.
Check c:\windows\minidump if thre's anything in there.
07-31-2018 01:08 AM - edited 07-31-2018 01:24 AM
I'm using 3 monitors: 1 X VGA and 2 X DVI (connected to the docking station through DVI-DisplayPort adapters). Although the same issue appears when connecting the VGA screen only...
I do notice a new dump file created in C:\Windows\MiniDump so there's probably a blue-screen of some sort on the way.
One clarification: My machine is an HP ZBook G4 (KabyLake, Intel HD Graphics 630), and not G3 as the original poster's. Also, I'm using Windows 10 64-bit Enterprise Edition RS3 (Version 1709, Build 16299.551).
So... what should I do next?
08-23-2018 04:49 AM
I found this notice from HP:
It's advising to install a Windows 10 update package, but my IT policy doesn't allow me to install it by myself. Can anyone try it out? if it works, I'll ask my IT to install it.
08-23-2018 08:29 AM
Unless I'm very mistaken, the update package in question is simply the May 2018 'patch Tuesday' monthly update for Windows 10. If your IT department has installed that or any subsequent cumulative update, you should have the update already installed.
09-09-2018 08:35 AM
Had this problem with an Zbook 17 G3, tried a lot of things. Reinstalled it several times, installed it with HP image etc.
In the end what I think did help was to install latest nvidia driver from nvidia site (not HP) and change to displayport 1.1 on the monitor, it didn't seem to like displayport 1.2.
12-11-2018 05:13 AM
Still having this issue - adding some details I got from the Windows Error Report:
Problem Event Name: BlueScreen
Parameter 1: 2
Parameter 2: ffffffffc000000d
Parameter 3: ffff990145cfd8e0
Parameter 4: ffff9b82753f6810
OS version: 10_0_16299
Service Pack: 0_0
OS Version: 10.0.16218.104.22.168.256.4
Locale ID: 1037
Extra information about the problem
Bucket ID: 0x119_2_DRIVER_FAILED_SUBMIT_COMMAND_dxgmms2!VidSchiSendToExecutionQueue
The last line implies this is a video driver problem... as @Bubler said, I believe it has got to do with the Nvidia driver (when the lid is open, I think the Intel driver takes precedence). I have the latest HP version (April 2018), and I prefer not to install a non-HP driver. So I'll wait till a new HP-certified version is released...
03-07-2019 08:52 AM
Update: issue is resolved for me, though I've made a few changes and not sure which one did the trick.
Possibly Relevant Changes:
- Updated BIOS version (from 01.21 to 01.25)
- Audio driver changes (I made these due to a different issue, but perhaps they are related):
- Uninstalled "nvidia HD audio driver" through Add/Remove Programs.
- Uninstalled "HP Dock Audio" and "Conexant Audio Device" (through device manager) and installed latest audio drivers from HP website.
- Also, 3 months have passed since my last attempt - I assume some Windows updates and some Enterprise updates were pushed to my computer in the time.
Hope this might help others.