hp laptop battery charging light sometimes becomes white ,plugged in not charging

[pranjal1234482]

my hp laptop charging light sometimes becomes white and plugged in not charging after 20 or 30 minutes of charging and after 2 or 3 minutes wcharging light again becomes orange and plugged in charging ,is this normal? please help

[Betty0610]

@pranjal1234482

Welcome to the HP Support Community.

Please help us with the correct model number of the Laptop.

Have you tried charging your laptop using a different adapter or battery?

Were there any recent windows update on the PC?

Please share the product number of the PC to assist you better.

Try updating the BIOS and chipset drivers on your PC and check if it helps.

You can update the drivers on your PC using the HP support assistant.

Refer to this article to know more information about using the HP support assistant. Click Here

Try the steps recommended below.

On your keyboard, press the Windows logo key and X at the same time to open the quick-access menu.

Click Device Manager.

In Batteries section, right-click on your battery driver, commonly it’s Microsoft  ACPI-Compliant Control Method Battery. Then click Uninstall device.

Restart the PC the drivers would automatically install again.

Run Power Troubleshooter.

On Cortana, enter Troubleshooter then select Troubleshooting.
Click Improve power usage to open the window, then click Next. 
This should run the troubleshooter and can fix any detected issues. You may try restarting your computer and charge your battery again.

Also, Try performing a hard reset on your laptop and check if it helps.

1. Turn off the computer.

2. Remove the computer from any port replicator or docking station.

3. Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.

4. Unplug the AC adapter from the computer.

5. Remove the battery from the battery compartment.

6. With the battery and power cord unplugged, press and hold the Power button for about 15 seconds to drain any residual electrical charge from the capacitors.

7. Insert the battery and plug the AC adapter back into the laptop, but do not connect any of the peripheral devices.

8. Press the Power button to turn on the computer.

   The computer starts normally or a startup menu opens.

   NOTE: 

   If your computer does not start after pressing the Power button, then a power reset did not resolve the startup issue. SeeAdditional resources for further troubleshooting steps.

9. If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key.

Lastly, try running a battery test from the F2 system diagnostics page and check if it helps.

Refer this article to know more information about running system diagnostics on your PC. Click Here

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!