cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
amgems
New member
1 0 0 0
Message 1 of 2
720
Flag Post

Solved!

Advanced CPU settings in BIOS

HP Recommended
HP Z8 G4
Linux

Brand new HP Z8 G4, with dual "silver xeon 4114" CPUs.

These CPUs support all the requisit functions in order to run a hypervisor.

The Qubes-OS install complained that the hardware lacked VT-x, VT-d, EPT, and interrupt remapping (VT-d again??)

 

My guess is that the BIOS disables this for a workstation.  That would be a poor choice.

 

Is there a secret option to get to the really advanced settings page?

Is there a version of the BIOS which enables these?

 

I am on BIOS version "P60 v01.42 02/26/2018".

 

How do I contact someone in HP who could influence features in future BIOS updates?

1 ACCEPTED SOLUTION

Accepted Solutions
iomare
Level 15
Level 15
12,341 9,597 2,451 4,598
Message 2 of 2
Flag Post
HP Recommended

Hi,

 

You should be able to enablre virtualization which is disabled by default. It will eiter be in the section security under System security or under tab advanced under system options.

 

You might need to set an administrator password to modify.

 

Page 44 of service manual:

 

http://content.etilize.com/User-Manual/1045332004.pdf

 

Hope it helps,

David

 

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
iomare
Level 15
Level 15
12,341 9,597 2,451 4,598
Message 2 of 2
Flag Post
HP Recommended

Hi,

 

You should be able to enablre virtualization which is disabled by default. It will eiter be in the section security under System security or under tab advanced under system options.

 

You might need to set an administrator password to modify.

 

Page 44 of service manual:

 

http://content.etilize.com/User-Manual/1045332004.pdf

 

Hope it helps,

David

 

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation