cancel
Showing results for 
Search instead for 
Did you mean: 
Gezkfir
New member
1 0 0 0
Message 1 of 2
205
Flag Post

Cant start windows after ssd replacement

HP Recommended
Hp 280 g1 mt business pc
Microsoft Windows 10 (64-bit)

Hey guys, so I have this desktop "hp 280 g1 mt business pc" and I decided to switch its ram and add an SSD, all was in working order until I tried to move windows from the HDD to the new SSD by fresh windows install.
I made a boot flash drive and went through the process, it all looked good but when I tried to start the pc it shows me the message "No boot disk detected or the disk has failed"with many other none important lines (product warranty, etc).
I tried changing the boot order putting the SSD first, didn't work, tried deleting and repurposing all the drives, even tried forcing the pc to run the SSD first by disabling/disconnecting the hard drive nothing...
I'm really struggling here, this is a friend's pc from work an I really can't let him down...
thanks a bunch!

1 REPLY 1
DGroves
Level 11
4,481 4,464 406 933
Message 2 of 2
Flag Post
HP Recommended

is the new ssd a "SATA" interface drive? your model computer only supports sata type ssd's for booting

 

https://support.hp.com/us-en/document/c04465455#AbT3

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation