cancel
Showing results for 
Search instead for 
Did you mean: 
MGWBERYL
New member
1 0 0 0
Message 1 of 2
193
Flag Post

FX1800 Audio to HDTV SPDIF Location Z800 Motherboard

HP Recommended
Z800
Microsoft Windows 10 (64-bit)

Trying to enable audio on my Z800  to a HDTV using the installed card quadro FX1800 via HDMI.

Z800 >Display port >Adpater >HDMI >HDTV .

 

My understanding is the only way to enable audio via HDMI from the sytem is connecting the 2 pin connector on the quadro FX 1800 to the (unknown if it exists) to the S/PDIF on the mother board. I cannot find the S/PDIF OUT on  the board.  Does someone have a diagram they can post. 

 

Also if the FX1800 can be enabled for sound via the display port in another way please advise. 

 

Z800 Product Number FL879UT

 

Thank you. 

 

1 REPLY 1
DGroves
Level 11
4,701 4,675 442 994
Message 2 of 2
Flag Post
HP Recommended

please read the z800 "service manual" if the jumper exists it will be documented

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation