cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
mfessler
Level 2
16 3 0 2
Message 1 of 2
478
Flag Post

HP ProDesk 600 G4/G5 MT - different Drive cages?

HP Recommended
HP ProDesk 600 G4

Hello,

according to the Maintenance and Service Guide there is the possibility to mount 2.5 drives in the Drive cage right next to the 3.5 drive - great solution!

But now I saw a video from a G4 MT which did not had this mounting space - actually the middle piece of sheet metal was missing and also the holes were different.

Video: (at 8min 6 sec): https://www.youtube.com/watch?v=3lm-cZ1O2EE#t=8m06

Does this means, that there are different Drive cages depending on if the model was equipped with or without an 2.5 drive in the first place?

Thank you for any clarification!


Best regards,

Martin

drivecage prodesk 600 g4 g5.jpg

HP PRODESK 600 G4 unboxing | core i7 8th generation | pc detailed reviewplease like comment and subscribe to get more latest videos.#desktop#pc#computer#8th gen
1 REPLY 1
DGroves
Level 11
4,792 4,071 451 928
Message 2 of 2
Flag Post
HP Recommended

he picture you show is for the Microtower G4 and the #2 area shown is for the slimline optical drive 

 

https://content.etilize.com/User-Manual/1048814307.pdf  (page 38)

 

you can mount one 3.5 and two 2.5 drives in the empty area on the top using a 3.5 to 2.5 adapter

(the pict you provided shows one 3.5 already installed)

 

the motherboard supports one SSD using a M.2 slot and one wireless card M.2 slot (wireless M.2 can not be used for SSD)

 

this video for the 600 G2 does however show the area next to the optical drive in better detail and it does support two 2.5 drives without using a adapter so it may be possible to order this drive bracket for use in the G4/G5

 

https://www.youtube.com/watch?v=mv1I7lf6MXQ

 

the area to the left of the optical drive is not for 2.5 drives, it's where you attach the mounting screws for the 5.25/3.5 adapter

 

 

Chapters:00:00 Introduction00:13 Access Panel01:46 Optical Drive04:15 PS2 and Serial Port Module05:02 System Fan06:08 Solenoid Lock Assembly07:07 Hood Sensor...
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation