cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
BirckF
New member
3 1 0 0
Message 1 of 4
933
Flag Post

Solved!

HP Z2 Tower G5 Workstation - FRONT Upgrade USB 3.2 Gen 2

HP Recommended
HP Z2 Tower G5 Workstation
Microsoft Windows 10 (64-bit)

Hello!

 

I recently purchased a HP Z2 Tower G5 Workstation and would like to purchase a Front USB-C card for my motherboard. I cannot seem to find it online. Can anyone help?

 

Type-C® SuperSpeed USB 10Gbps signaling rate port

Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
SDH
Level 10
2,516 1,956 236 691
Message 4 of 4
Flag Post
HP Recommended

Some HP "optional" parts are only available if you order them as part of a "build to order" custom workstation.  The HP PartSurfer system may show certain parts available to purchase and install yourself.  What I believe you want is in the attached two PDFs from the PartSurfer system, and cost from HP is about $50.00 USD. 

 

Not all USB Type C ports have the higher charging capacity... from the document DGroves found for you I believe this one does, which may be why you want it.  The higher capacity charging ports may be designed  to stay active when the workstation is powered down, which can be handy.

 

The part number is L92219-001 from the PDFs attached... and HP has none in stock.  Used parts are harder to find for newer workstations but at least now you have something to work from.

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3
BirckF
Author
New member
3 1 0 0
Message 2 of 4
Flag Post
HP Recommended

This is the part for Z2 G4: 4KY85AA

Here is a link:

https://www.directdial.com/us/item/z2-front-usb-c-3-1-port/4ky85aa

 

I'm looking for the equivalent for Z2 G5 tower.

 

Help please!!

 

🙂

Was this reply helpful? Yes No
DGroves
Level 12
5,147 4,420 476 1,093
Message 3 of 4
Flag Post
HP Recommended

as far as i know this model COMES WITH TWO FRONT USB 3.1 5GBps ports

 

ONE USB 3.1 TYPE "C"  10GBps

 

two rear usb 3.2, 40 gbps

 

https://www8.hp.com/h20195/v2/GetPDF.aspx/c06912216.pdf

Was this reply helpful? Yes No
SDH
Level 10
2,516 1,956 236 691
Message 4 of 4
Flag Post
HP Recommended

Some HP "optional" parts are only available if you order them as part of a "build to order" custom workstation.  The HP PartSurfer system may show certain parts available to purchase and install yourself.  What I believe you want is in the attached two PDFs from the PartSurfer system, and cost from HP is about $50.00 USD. 

 

Not all USB Type C ports have the higher charging capacity... from the document DGroves found for you I believe this one does, which may be why you want it.  The higher capacity charging ports may be designed  to stay active when the workstation is powered down, which can be handy.

 

The part number is L92219-001 from the PDFs attached... and HP has none in stock.  Used parts are harder to find for newer workstations but at least now you have something to work from.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation