cancel
Showing results for 
Search instead for 
Did you mean: 
procc
Level 2
10 6 1 0
Message 1 of 2
197
Flag Post

Solved!

HP Z420 strats up only on second try

HP Recommended
HP Z420
Microsoft Windows 10 (64-bit)

Hi

 

The problem is:
Turning on computer, computer goes through bios, all ok and etc., then shows windows 10 logo, spinning circkle does not appear, and after maybe 40 seconds, computer shuts down.

Then I turn on computer second time, and computer works without a problem, loads windows and etc.

What could be the cause of this problem? Maybe some one encountered something similar?

1 ACCEPTED SOLUTION

Accepted Solutions
procc
Author
Level 2
10 6 1 0
Message 2 of 2
Flag Post
HP Recommended

Found the culprit.
It was windows "fast startup" function. Disabled it, and now computer always starts without a problem.

View solution in original post

0 Kudos
1 REPLY 1
procc
Author
Level 2
10 6 1 0
Message 2 of 2
Flag Post
HP Recommended

Found the culprit.
It was windows "fast startup" function. Disabled it, and now computer always starts without a problem.

View solution in original post

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation