HP Z620 BIOS configuration problem with 1 X SSD Sasmung(256GB) + 1 X SATA Disk(2TB)

[gauguin16]

Hi,

Can someone give me a tip how I set in BIOS for 1 X SSD Sasmung(256GB) + 1 X SATA Disk(2TB).

I don't use UEFI boot sources, just Legacy boot source. It means the UEFI is disabled.

It runs Windows 10 OS on the SSD Sasmung(256GB) and SATA Disk(2TB) for data storage.

The problem is, wenn I just boot with only  SSD Sasmung(256GB) disk, it works (windows 10 running), but it doesn' work with both disks.

Please let me know if you have any questions?

Regards,

gauguin16

[DGroves]

please check the boot order in the bios, the SSD must be above the entry for the mech drive

[gauguin16]

Hi,

At first, thank you for your answer.

I set it the boot order to start the SSD in the bios. 

As spoken it just works good with only SSD disk, but not with both disks.  

And error message is "system not found" and "reboot again".

[DGroves]

please post a picture of your bios boot order