cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
4413
New member
3 2 0 0
Message 1 of 5
384
Flag Post

How to fix "1801-Microcode Update Error" in HP Compaq dc67600 Convertible Minitower

HP Recommended
Example: HP Compaq dc7600
Microsoft Windows 8.1 (32-bit)

Product mane: HP Compaq dc7600

SKU number AF844AW#ABV

 Intel (R) Pentium 4 CPU 3.00GHZ

Speed 3000/800MHZ

Stepping F65

4 REPLIES 4
Paul_Tikkanen
Level 21
Level 21
136,413 91,075 20,986 28,073
Message 2 of 5
Flag Post
HP Recommended

Hi:

 

What is the processor model that you installed?

 

Below is the link to the dc7600 quickspecs.  You can find the supported processors on page 6.

 

https://nts.nl/site/html/modules/PDF/dc7600usdt.pdf

Was this reply helpful? Yes No
4413
Author
New member
3 2 0 0
Message 3 of 5
Flag Post
HP Recommended

processor Model: Intel (R) Pentium (R) 4 CPU 3.00 GHZ

Processor Speed: 3000/800 MHZ

Stepping: F65

Cache Size: (L1/L2)

System Bios 786D1v0.103

Classic Serial Number: CZC6193S9V

Asset tracking: CZC6193S9V

Was this reply helpful? Yes No
4413
Author
New member
3 2 0 0
Message 4 of 5
Flag Post
HP Recommended

processor Model: Intel (R) Pentium (R) 4 CPU 3.00 GHZ

Processor Speed: 3000/800 MHZ

Stepping: F65

Cache Size: (L1/L2)

System Bios 786D1v0.1.03

Classic Serial Number: CZC6193S9V

Asset tracking: CZC6193S9V

Was this reply helpful? Yes No
Paul_Tikkanen
Level 21
Level 21
136,413 91,075 20,986 28,073
Message 5 of 5
Flag Post
HP Recommended

That processor should be supported, so here is how you update the microcode to get rid of that error...

 

I have zipped up and attached below, 3 files.

 

Get a blank USB flash drive.

 

Plug the drive into your PC and run sp27608 which will format the drive so that it is bootable.

 

Once that is done, copy the file contents of the DOS System Files folder to the flash drive.  Just the files, not the folder.

 

Then copy the file contents of sp33313 to the flash drive.  Just the files, not the folder.

 

Restart the PC and boot it from the USB flash drive.

 

It should arrive at a command prompt.

 

At the command prompt type Flashbin.exe and press the enter key.

 

Follow the onscreen instructions to update the microcode.

 

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation