• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP Z4 G4
Microsoft Windows 10 IOT

I  need to have 4 numbers of "HP 512GB SATA SSD" in HP Z4 G4 workstaion with 2 RAID 1 setup in the following configuration Disk0&1 -First RAID 1  array

Disc2&3 - second RAID 1 array

Is it possible to have this configuration in HP Z4 G4 workstation ?. Please help!

1 REPLY 1
HP Recommended

the z4 series has 5 free drive bays in the default configuration, so yes you can add 4 SATA based SSD's and then raid them using the intel software based solution that is part of the RSTe package, just be aware that since the RST driver is software based you will not beable to boot from the raid arrays

 

if you require them to be booting, then you will need to add a hardware based SAS/SATA raid card. such a option is available from HP but i don't know if this card would suit your needs (it's only available with the xeon "W" series cpu's). a non HP raid card such as the LSI 93xx line while not a approved HP part should also work as a bootable Raid 1 setup

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.