08-04-2020 06:08 AM - edited 08-04-2020 06:09 AM
Hi. After some problems i formatted completely my workstation, i thought that only i could find everything useful to restore all drivers and software. But is not like that, so now i cannot use the VR headset because is missing the RGS software.
Is there a way to download again the software, or is there a way to have a "Factory default settings" state of the machine?
No restore points, nothing, i erased everything, really i didn't know that i should't find every driver and software on the HP site.
Solved! Go to Solution.
08-04-2020 12:04 PM
HP (for non server based systems) RGS software has it's own dedicated web page as it's compatible with numerous systems
HP enterprise (servers) also has a version of their take on RGS, visit their website for info
08-04-2020 01:34 PM
i know is a little bit off topic, but i tried to use the VR following the instructions with the Z backpack. When i turn on the workstation, simply the headset went off after few seconds. So i thought: maybe i need to reinstall the RGS that i lost formatting, but it does nothing.
Exactly, how the signal should go from the Z g1 to the headset? Without even accessing windows? thank you.
08-04-2020 10:48 PM
have you installed the VR Backpack software? this software is required for the device to work
and is not the same as the "RGS" software
HP Z VR Backpack G1 Windows 10 x64 Driver Pack
you want sp93203.exe
08-04-2020 11:43 PM
Hi! Yes i've installed after downloading it from hp drivers/softwares page of the product. None happens i mean i launch the installation and simply a prompt window pop up for few seconds, than nothing else. I'll try again.. Thanks
08-05-2020 12:28 AM
I already did. The first link is simply the product page. The second one is the same from which I've already downloaded the same driver you indicate anyway i downloaded it again and, after an extraction of the exe package, nothing happens. I shut off the pc, connect the vr, remove from thw dock station, turn it on and for few seconds i can see a misaligned hp screen (the same which appear at the center of my monitor in normal condition) then everything went black. I'll try removing windows user at the start up. I've downloaded a lot of PDF with troubleshooting instruction but say nothing about this issue. Thank you.
08-05-2020 12:43 AM
recheck "ALL" steps, do not skip any steps
check control panel, ....does it show the VR driver installed?
are you using the USB "c" cable that came with the kit? if not do so
read troubleshooting section
08-05-2020 06:24 AM
Ok i read everything. I upgraded everything from the HP Assistant, downgraded to Win 1809, installed all the missing drivers. 93203.exe is been exectuted but i can't fint any trace of it anywhere, except for the installation folder.
My headset have it's own usb 3 cable, is not unpluggable. I saw online that one can use the VR headset he wants so i don't think i need the original cables went with this workstation to plug it in.
in command-dos i listed the entire list of drivers, but i didn't see nothing like "hp backpack " etc.