HP support site - Windows 10 - Bios upgrades HP 6200 Pro SFF

[Mohsin479]

hi there!

i have same but different problem. i am just update bios for my hp compaq 6200 pro 2.2?? to 2.32 and after that just install windows 10 64bit. i am just facing the problemzzzzz i think 

pc restart to slow

when power on pc doesn't hp logo or bios menu and just start windows after mint or more and some time just power on and no display no beep after few mint pc turn off

then i download bios v2.21 and v2.28 after installing these there is no result of bios downgrading

plzzz hlp me

sorry for my bad english

thanks in advance

[Paul_Tikkanen]

Hi:

Sorry that you didn't come across this discussion until after you updated the BIOS.

There is no way to go back to an older version, and the only thing you can do to have the PC restart in a reasonable amount of time is to do this...

Here is how to fix...

Turn off the PC...press the power button, then start tapping the ESC key until you are presented with the options menu.

From there, select SYSTEM SETUP. Once inside SYSTEM SETUP, select SECURITY, inside that menu select DEVICE SECURITY.

Once inside that menu, select EMBEDDED SECURITY DEVICE ---> DEVICE AVAILABLE, change this one thing to DEVICE HIDDEN.

Press F10 to save, and then go back in to double check it is HIDDEN.

Exit BIOS by saving all changes.

Reboot