Create an account on the HP Community to personalize your profile and ask a question
01-15-2020 03:29 PM
Operating System: Microsoft Windows 10 (64-bit)
I have tried for the last to days to install my new "Thunderbolt 2 PCIe Card" in my Z840 Workstation, without any luck.
The card is a Thunderbolt adapter, PCIe with model nr. HP F3F43AA
and the driver is: Intel Thunderbolt Driver and Software - sp74948
I have connected TB header cable, from the card to the Motherboard.
I have updated the Bios to the latest and checked in the Bios where I can see a new line under ADVANCED named: Thunderbolt Mode, and here it is set to "Unique ID"
But still, the device manager says unknown device??
HELP anybody what am I doing wrong ?
4 REPLIES 4
01-15-2020 06:42 PM - edited 01-15-2020 06:46 PM
usually you install the thunderbolt software FIRST, reboot and then install the card (z840 slot 5 which you have done)
try removing the software and then the card and reinstall for the HP SP driver file,
Installing Thunderbolt Controller driver (tbtxxx) triggers the full SW package installation.
also this driver is a later version and should support your card (check your cards hardware id against the driver's list)
TbtBusDrv_DeviceDesc1575 = 'Thunderbolt(TM) Controller - 1575'
TbtBusDrv_DeviceDesc1577 = 'Thunderbolt(TM) Controller - 1577'
TbtBusDrv_DeviceDesc15BF = 'Thunderbolt(TM) Controller - 15BF'
TbtBusDrv_DeviceDesc15D2 = 'Thunderbolt(TM) Controller - 15D2'
TbtBusDrv_DeviceDesc15D9 = 'Thunderbolt(TM) Controller - 15D9'
TbtBusDrv_DeviceDesc15E8 = 'Thunderbolt(TM) Controller - 15E8'
TbtBusDrv_DeviceDesc15EB = 'Thunderbolt(TM) Controller - 15EB'
TbtBusDrv_DeviceDesc15DC = 'Intel(R) Controller - 15DC'
TbtBusDrv_DeviceDesc15DD = 'Intel(R) Controller - 15DD'
TbtBusDrv_DeviceDesc15DE = 'Intel(R) Controller - 15DE'
01-16-2020 02:24 AM
I pulled the card out, but I can't find the TB driver to uninstall ?
So I can't uninstall the driver.
Maybe that's my problem, the driver from HP's official website is not installed probably and doesn't function ??
I tried to download another driver via the link from your post, but my virus protection software is not allowing it to download, it says that the .exe file is dangerous.
01-19-2020 04:29 PM - edited 01-19-2020 04:31 PM
turned of the virus protection, uninstalled both HP drivers and the one from Intel
installed them one ad the time again from the root of C:drive
... still same result.
device manager is not recognizing the card.
(I have checked the jumper on motherboard is set to 1-2)
Is there somebody who has the combination Z840 and HP Thunderbolt 2 working??
Did I got the wrong card, is the "Unique ID mode" wrong, how can isolate the problem???
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community