02-18-2018 09:03 AM
We have been using the unit with a Samsung Odyssey Mixed reality headset and it has been working flawlessly when the computer is docked.
The problem is when I undock the unit, the headset goes black immediately and only comes back when I dock the system again.
The problem persists even after plugging in the external batteries.
I was thinking the computer did not provide enough power to drive the headset but I discovered that if I leave the computer on the dock and I disconnect the power supply (from the dock) the VR headset still works fine.
If the dock is disconnected from power as I mentioned above and I disconnect the HDMI cable going to the external monitor (from the dock) then the VR headset goes black again.
Could you please help me with this issue, the device is useless if we can’t use VR while disconnected from the dock.
02-19-2018 01:20 AM
when you undock the video subsystem resyncs, and the laptop usually defaults to a undocked profile this profile can be diffrent than the docked profile
i suspect the above is the cause of your vr blank screen,
try reinstalling the software while undocked to create a undocked profile that has the VR settings installed/updated
02-22-2018 04:02 PM
There is really no software to install while undocked, the problem happens even inside the windows mixed reality portal, we havent even been able to test with our own app.
I got in touch with support and they told me the backpacjk is only compatible with the HP Mixed Reality headset, so we ordered one, but no luck still goes black right after undocking the backpack.
Could you elaborate a bit more on your idea of installing the software again?
02-22-2018 04:14 PM - edited 02-22-2018 04:37 PM
simply undock, then run the VRsoftware install program again
here's a test, docked run the vr program confirm working normally then shutdown and then undock and run the vr app again. does it work normally? if so then it's not a docked/undocked profile issue but most likely due to the video display resyncing when docking/undocking and the source of this could be the vr app or the video driver (or both)
once you narow down the culprit(s) contact them with laptop model/OS used/video driver buld and see if they can reproduce the problem if they can they might fix it
03-15-2018 05:06 PM
I finally was able to find a solution, looks like HP did not test this units with Mixed Reality Headsets even thoug they specifically mention its supported.
Mixed reality headsets need an external monitor pluged in to the computer for the device to work, so in order to use the backpack while undocked and connected to any Mixed Reality HMD you have to purchase a Mini DP - DisplayPort display EDID emulator.
I purchased this one and it the computer works properly now with a mixed reality headset.
03-28-2018 09:52 AM - edited 03-28-2018 09:56 AM
You are correct, this is an issue with how the Windows MR hardware and software functions.
When the Windows MR goggles are installed, they expect a monitor to always be connected, so when the backpack is undocked, the goggles cut out as it no longer sees a monitor. This will happen on any unit made by any manufacturer.
The VR backpacks were originally designed with the Vive in mine. (Hence the additional power ports at the top eliminating the need for the Vive box.)
There are solutions to get the WIndows MR head set working, however:
If you have the Omen back pack: You can order an EDID emulation dongle to 'fool' the unit into thinking there is a monitor. (Check available ports on the Omen VR backpack and order accordingly. - I believe there is an open mini-DP port on the top.)
If you have the Z VR Backpack: You can use an EDID dongle on this as well, but because this unit has a Quadro GPU, you can inject a digital EDID into the nVidia software to do the same thing. (I have tested this and it does work.)
Quality Manager - HP VR / Z Desktops
“iMaxx” FORMER VOODOO PC / HP LEGACY GAMING SERVICE MANAGER
While I am an HP employee, my comments and suggestions are my own and do not represent HP Inc.