-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Business PCs, Workstations and Point of Sale Systems
- Z230 Boot Up seems impossible
Create an account on the HP Community to personalize your profile and ask a question
04-07-2020 04:46 PM
My HP Z230 workstation stopped booting issuing a single beep, then spin up the fan, then off then repeat forever.
I saw a post that said pull the power plug and MB battery and the BIOS would reset. I did this and now the computer beeps 5 times and does nothing, but the system fan will start after 15 seconds or so. At no time do I ever see anything on the screen and since I have a USB keyboard I can't hit the F10 or any other key because the keyboard never gets recognized. I feel like this thing is bricked at this point. Is there ANY WAY to make this sucker restart in factory mode.
Is there a way to get around this problem?
I've opened the case (carefully) and jiggled the drive cables, memory modules and basically tried to make sure everything was properly seated.
This machine has run fine in as lately as yesterday. Today no luck. Any help greatly appreciated on this.
04-08-2020 04:25 PM
5 beeps on startup is usually memory, or a bad system board
you also don't state if you have a tower or SFF model system
please read the z230 SERVICE MANUAL troubleshooting section
http://h10032.www1.hp.com/ctg/Manual/c04608515
https://support.hp.com/us-en/product/hp-z230-tower-workstation/5367825/manuals
Didn't find what you were looking for? Ask the community