cancel
Showing results for 
Search instead for 
Did you mean: 
BOUB
New member
5 1 0 0
Message 1 of 12
896
Flag Post

missing drivers for hp 7800

HP Recommended
PCI\VEN_8086&DEV_29B4&SUBSYS_2819103C&REV_02 and PCI\VEN_8086&DEV_29B7&SUBS
Microsoft Windows 10 (32-bit)

hello 

I need the following two drivers for a hp-7800 for windows 10 32bit.

 Identifiant matériel : PCI\VEN_8086&DEV_29B4&SUBSYS_2819103C&REV_02 

and 

 Identifiant matériel : PCI\VEN_8086&DEV_29B7&SUBSYS_2819103C&REV_02

 

 

Hope somebody can help where I can find these drivers for windows 10.

kindly regards

11 REPLIES 11
Paul_Tikkanen
Level 21
Level 21
135,163 124,519 20,721 31,812
Message 2 of 12
Flag Post
HP Recommended

Hi:

 

You need these drivers for those devices...

 

This package contains the Intel Active Client Manager Host Embedded Controller Interface (HECI) device driver for the supported desktop models and operating systems.

 

https://ftp.hp.com/pub/softpaq/sp46001-46500/sp46137.exe

 

This package contains the Intel Local Management Service (LMS) and Serial-over-LAN (SOL) support for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

 

https://ftp.hp.com/pub/softpaq/sp46001-46500/sp46134.exe

Was this reply helpful? Yes No
DGroves
Level 11
4,701 4,675 442 994
Message 3 of 12
Flag Post
HP Recommended

 

your system never came with windows 10 as such HP will not have drivers posted for it

 

have you not looked yourself using google and your listed PCI\VEN strings

 

https://www.google.com/search?q=PCI%5CVEN_8086%26DEV_29B4%26SUBSYS_2819103C%26REV_02&oq=PCI%5CVEN_80...

 

looking at the above link will tell you that this is for a pci simple com controller that is part of the Intel AMT system

 

Intel never made a AMT driver/software package  for this model that runs under win 10, therefor you need to enter the bios and disable the AMT function (which is only useful in corporate domain use)

Was this reply helpful? Yes No
Paul_Tikkanen
Level 21
Level 21
135,163 124,519 20,721 31,812
Message 4 of 12
Flag Post
HP Recommended

I happen to have a dc7800 running W10 pro just fine using the W7 drivers I posted.

Was this reply helpful? Yes No
DGroves
Level 11
4,701 4,675 442 994
Message 5 of 12
Flag Post
HP Recommended

from your listed softpack

 

DESCRIPTION:

The Intel(R) Management Engine Interface
(Intel(R) ME Interface) is the interface
between the Intel(R) Management Engine
firmware and the host. Drivers and
applications on the host that wish to
interact with Intel(R) Management Engine
through host interface would use the
Intel(R) ME Interface host windows
driver.

Supported Operating Systems:
Windows 2000, Windows XP (i386 & x64)
Windows Vista (i386 & x64)
Windows 7

 

my personal results on this have been the windows 7 serial com3 driver will not install under win 10 even if you try to install using win 7 emulation

Was this reply helpful? Yes No
Paul_Tikkanen
Level 21
Level 21
135,163 124,519 20,721 31,812
Message 6 of 12
Flag Post
HP Recommended

I had no problems whatsoever installing either driver.

 

However, worst case scenario is you manually install the driver by browsing to the unpacked driver folder in the C:\SWSetup folder.

 

I did not disable AMT in the BIOS, but I do not use the PC in a corporate environment to push software updates, etc., so I have no idea if the AMT system would actually work in W10.

 

Also, the W7 Soundmax audio driver provides a much better audio experience on W10 than using the generic one that Microsoft installed.

Was this reply helpful? Yes No
DGroves
Level 11
4,701 4,675 442 994
Message 7 of 12
Flag Post
HP Recommended

could you check device manager and see if you have a working com 3 device installed

 

the SOL com driver is what will useually fail to install even if you manually force it through the ini file

Was this reply helpful? Yes No
Paul_Tikkanen
Level 21
Level 21
135,163 124,519 20,721 31,812
Message 8 of 12
Flag Post
HP Recommended

I attached a screen shot of that device manager category. I'm running W10 Pro v1903 on this PC

 

On this PC, it is COM4

 

 

 

 

Was this reply helpful? Yes No
DGroves
Level 11
4,701 4,675 442 994
Message 9 of 12
Flag Post
HP Recommended

thanks for the confirmation, i'll DL the sp you listed and see if i can use it on my dc7900 and several other systems that simply refuse to load the driver in win 10 x64

Was this reply helpful? Yes No
Paul_Tikkanen
Level 21
Level 21
135,163 124,519 20,721 31,812
Message 10 of 12
Flag Post
HP Recommended

You're very welcome.

 

You need a different version of the amt driver for the dc7900...

 

https://ftp.hp.com/pub/softpaq/sp45501-46000/sp45814.exe

 

Each business desktop PC (dc7700, 7800,7900, 8000 Elite, 8100 Elite, 8200 Elite, etc) uses a different version of the driver.

 

Use the W7 x64 driver found on the specific model's support page under the Software-System Management driver section.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation