running Win 10 pro on my 6200 sff with 4 gb ram.

[troggy]

Want to max out my ram. Currently has 2 ddr3 (udimm) 2gb pc3-10700 (667mhz) sk hynix 

single rank  with p/n hmt325u6cfr8c-h9. need to know what to get also m/b is hp model 1497

with pci-expresss 2.0 (5.0 gt /s), chipset intel sandybridge rev0.9, southbridge intel q65 rev b2,

lpcio smsc.

thankyou

[Paul_Tikkanen]

Your PC supports 4 x 8 GB of DDR3-1333 MHz memory.

You can also install DDR3L-1600 memory but it will only run at 1333 MHz.

Timetec 32GB KIT(4x8GB) DDR3 / DDR3L 1333MHz PC3-10600 Non-ECC Unbuffered 1.5V / 1.35V CL9 2Rx8 Dual...

The HP Quickspecs at the link below, page 7 indicates that 8 GB chips need to be dual ranked memory.

HP Compaq 6200 Pro Series

1GB, 2GB, and 4GB DDR3 DRAM technologies are supported. Using 4GB device technologies, the largest memory capacity
possible is 32 GB, assuming dual channel mode with four x 8 GB dual ranked unbuffered DIMM memory configuration.