cancel
Showing results for 
Search instead for 
Did you mean: 
Ariellmaccurdy
New member
2 1 0 0
Message 1 of 4
695
Flag Post

Solved!

HP mini 110-1125NR

HP Recommended
I dont remember the bios password for my HP Mini 110-1125NR. I tried 3 times and after that the message
"password check failed
Fatal Error . . . System Halted.
CNU946B8CB". Appears please help
0 Kudos
1 ACCEPTED SOLUTION

Accepted Solutions
DavidPK
Level 18
49,520 49,455 9,902 16,874
Message 2 of 4
Flag Post
HP Recommended

@Ariellmaccurdy

 

Enter     e9lovgpuep    ( 3rd character is a lower case L )

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

View solution in original post

3 REPLIES 3
DavidPK
Level 18
49,520 49,455 9,902 16,874
Message 2 of 4
Flag Post
HP Recommended

@Ariellmaccurdy

 

Enter     e9lovgpuep    ( 3rd character is a lower case L )

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

View solution in original post

Ariellmaccurdy
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended
Now how do I remove this and reset my admin password as well?
0 Kudos
DavidPK
Level 18
49,520 49,455 9,902 16,874
Message 4 of 4
Flag Post
HP Recommended

Hi,

 

You can remove the need for a power on password as follows - use the code from my previous post where necessary.

 

Shut down the notebook.  Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu.  Use the arrow keys to highlight the Security tab and hit enter.  Use the arrow keys again to highlight power on password and hit enter.  Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field.  Press f10, select to save the new settings and hit enter.

 

Regarding your Windows log-on password, there is a general policy on the Forum not to provide methods to bypass this, however a local computer shop would be able to do this for you.

 

Another option, if all your personal data etc is backed-up, would be to reset the notebook to its 'Factory Condition' and then set it up from the beginning – if you don’t have your Recovery Media, the notebook will have shipped with a Recovery Partition which can be accessed at boot - ie shutdown the notebook, then start tapping away at f11 as soon as you power on.

 

A full guide on this can be found on the following link.

 

http://support.hp.com/us-en/document/c00006110#!&AbT1%3Fjumpid=hpr_r1002_usen_link1

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation