cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
brodbobot
New member
3 1 0 0
Message 1 of 3
485
Flag Post
HP Recommended

High rate failure of 1.2TB HD on HP DL380p Gen8 with fully populated (25) hard drives.

HP DL380p Gen8

Smart Array 420i

25 hard drives

OS - Red Hat 6+

 

This a global issue...

 

This brings the total of 1.2TB HDDs replaced to 20 so far, a case was raised with HP because of the high number of failures, there are a couple of strange issues about these incidents, all the failed HDDs are in slot 20 as a hot spare, the controller is at 5.22,  yet HP did not pick up on this, if we had received a bad batch of HDDs, the failures would be in various slots, the odds of installing every bad HDD in slot 20 are vast.

 

 

Smart Array P420i in Slot 0 (Embedded)    (sn: 001438031178480)

 

   array A (SAS, Unused Space: 0  MB)

 

 

      logicaldrive 1 (279.4 GB, RAID 1, OK)

 

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)

      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)

 

   array B (SAS, Unused Space: 0  MB)

 

 

      logicaldrive 2 (16.4 TB, RAID 6, OK)

 

      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:9 (port 1I:box 1:bay 9, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:10 (port 1I:box 1:bay 10, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:11 (port 1I:box 1:bay 11, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:12 (port 1I:box 1:bay 12, SAS, 1200.2 GB, OK)

      physicaldrive 1I:1:13 (port 1I:box 1:bay 13, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:14 (port 2I:box 1:bay 14, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:15 (port 2I:box 1:bay 15, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:16 (port 2I:box 1:bay 16, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:17 (port 2I:box 1:bay 17, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:18 (port 2I:box 1:bay 18, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:19 (port 2I:box 1:bay 19, SAS, 1200.2 GB, OK)

      physicaldrive 2I:1:20 (port 2I:box 1:bay 20, SAS, 1200.2 GB, Predictive Failure, spare)

 

   Enclosure SEP (Vendor ID HP, Model Gen8 ServBP 25+2) 377 (WWID: 5001438029C5DE13, Port: 1I, Box: 1)

 

0 Kudos
2 REPLIES 2
Level 19
Level 19
79,825 79,720 9,877 21,328
Message 2 of 3
481
Flag Post
HP Recommended

High rate failure of 1.2TB HD on HP DL380p Gen8 with fully populated (25) hard drives.

Hi,

 

We use a very small number of HP disk. Other vendors have the same. I can't take photos (the rule: no camera, no phone - security will simply walk me out and I will have no future) which show mountains of failling HDD's in my data centers. You are talking about very high RPM here.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
0 Kudos
Dennis_Handly
Level 7
1,516 1,504 29 60
Message 3 of 3
469
Flag Post
HP Recommended

High rate failure of 1.2TB HD on HP DL380p Gen8 with fully populated (25) hard drives.

This is the wrong company for Servers, Storage, Software, and Networking. Please use the Hewlett Packard Enterprise Community:
http://community.hpe.com/

 

Your new topic there:

http://community.hpe.com/t5/General/High-rate-failure-of-1-2TB-HD-on-HP-DL380p-Gen8-with-fully/m-p/6...

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation