cancel
Showing results for 
Search instead for 
Did you mean: 
ArmandoAL
New member
2 1 0 0
Message 1 of 5
1,393
Flag Post

Solved!

I-Series rack

HP Recommended

Looking for information about Intelligent series rack:

-Installation guide

-Unpack the rack (empty and full equiped)

 

Thanks.

0 Kudos
1 ACCEPTED SOLUTION

Accepted Solutions
WyreNut
Level 15
16,242 15,000 1,039 2,096
Message 4 of 5
Flag Post
HP Recommended

Unfortunately, you are asking this question in the wrong place.   This is the Consumer Forum, manned mostly by Volunteers.

 

You would have greater results asking over at the HP Enterprise support forum:

 

https://community.hpe.com/

 

WyreNut

-------------------------------------------------
I am a Volunteer here, not employed by HP.

You too can become an HP Expert! Details HERE!


If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

View solution in original post

0 Kudos
4 REPLIES 4
banhien
Level 19
Level 19
92,834 92,711 12,006 25,593
Message 2 of 5
Flag Post
HP Recommended

Hi,

 

I think iSeries machines are from IBM. I am not allow to take picture in computer halls otherwise I can send you a photo. There are many sizes, the following image shows similar to our machines

 

 

Image result for IBM iseries images

 

Regards. 

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



0 Kudos
ArmandoAL
Author
New member
2 1 0 0
Message 3 of 5
Flag Post
HP Recommended

Thanks for the promp response, looking for information on this rack I found following picture. You can see is not the same as the ones you sent (I believe) I've been searching for info about installation manual and I only found info related to Advanced and Enterprise Series, probably steps to install the cabinet are the same, that's what I need to know and also packing dimensions and weight and in case the rack is shipped with factory installed equipment, what is the best way to handle and transport and if there are special recommendations to unpack the cabinet. Thanks.

 

HP I Series rack.jpg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0 Kudos
WyreNut
Level 15
16,242 15,000 1,039 2,096
Message 4 of 5
Flag Post
HP Recommended

Unfortunately, you are asking this question in the wrong place.   This is the Consumer Forum, manned mostly by Volunteers.

 

You would have greater results asking over at the HP Enterprise support forum:

 

https://community.hpe.com/

 

WyreNut

-------------------------------------------------
I am a Volunteer here, not employed by HP.

You too can become an HP Expert! Details HERE!


If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

View solution in original post

0 Kudos
Dennis_Handly
Level 7
1,515 1,503 30 63
Message 5 of 5
Flag Post
HP Recommended
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation