cancel
Showing results for 
Search instead for 
Did you mean: 
mileCame
New member
3 1 0 1
Message 1 of 7
1,293
Flag Post

Solved!

I found a solution to my question but I am totally baffeled as to how to indicate "Solved"

HP Recommended

I found a solution bu I find this Forum Site a cryptic nightmare and I have no idea how to change the post I made regarding scaning to 8.5x11.  This site is more difficult to understand than my problem was

1 ACCEPTED SOLUTION

Accepted Solutions
Lharri
Level 2
23 19 1 5
Message 6 of 7
Flag Post
HP Recommended

I think 1)  if you sign in and then 2)cut and paste the google location where you found the solution into the address line of your page, you will find the post your are looking for so that you can post a reply that it solved your problem. However, since it was not your original post I do not think you can mark it as solved.

 

You could also write up a separate post and refer to the post you found using the link and note that it was the same problem. Then give kudos to the person who solved the problem in the post you found via google. This should accomplish your goal.

Please click the white Kudos star to the left if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

View solution in original post

0 Kudos
6 REPLIES 6
banhien
Level 19
Level 19
92,611 92,489 11,971 25,526
Message 2 of 7
Flag Post
HP Recommended

Hi,

 

You should see something like this at near the bottom right. Just click it:

 

     solution.PNG

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



0 Kudos
WyreNut
Level 15
16,237 14,996 1,038 2,094
Message 3 of 7
Flag Post
HP Recommended

@mileCame wrote:

I found a solution bu I find this Forum Site a cryptic nightmare and I have no idea how to change the post I made regarding scaning to 8.5x11.  This site is more difficult to understand than my problem was


To Edit a post - Click the "Options" picklist in the upper right corner of your post, then choose "Edit Reply".  Simple!  🙂

 

WyreNut

-------------------------------------------------
I am a Volunteer here, not employed by HP.

You too can become an HP Expert! Details HERE!


If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
0 Kudos
mileCame
Author
New member
3 1 0 1
Message 4 of 7
Flag Post
HP Recommended

I found the solution by using google but can't indicate resolved until I sign in and then I'm in mystery land and can't find the solution again unless i page througth 8000 plus solutions.  Why can't the site be more intuitive and use friendly?

0 Kudos
banhien
Level 19
Level 19
92,611 92,489 11,971 25,526
Message 5 of 7
Flag Post
HP Recommended

Hi,

 

Sorry, I still can understand what are you trying to do. To access to this site/forum you can search, read BUT if you wish to write something you need to logon (like ALL forums around the world). If you wish to look at all your posts, just click to your name, you don't need to logon to view those posts.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



0 Kudos
Lharri
Level 2
23 19 1 5
Message 6 of 7
Flag Post
HP Recommended

I think 1)  if you sign in and then 2)cut and paste the google location where you found the solution into the address line of your page, you will find the post your are looking for so that you can post a reply that it solved your problem. However, since it was not your original post I do not think you can mark it as solved.

 

You could also write up a separate post and refer to the post you found using the link and note that it was the same problem. Then give kudos to the person who solved the problem in the post you found via google. This should accomplish your goal.

Please click the white Kudos star to the left if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

View solution in original post

0 Kudos
SUBRINA
New member
2 1 0 0
Message 7 of 7
Flag Post
HP Recommended

hi just want to know how to get my user s account type standard user it not working

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation