Changed my ink catridges now printer is not printing

[Bernie5691]

I changed my ink cartridges now the printer is working but not printing on the paper

[sandytechy20]

@Bernie5691

Welcome to HP support community.

Make sure the ink cartridges are properly vented and seated correctly

1. Press the Power button to turn on the printer, if it is not already on.

2. Place your fingers into the slot on the left side of the printer, and then gently lift up to open the cartridge access door. The carriage moves to the cartridge access area. Wait several seconds until the carriage is idle and silent before you continue.

   

3. Press the tab inward on the front of the old cartridge to release it, and then pull up on the cartridge to remove it from the slot.

   

4. Examine the vent area above the HP logo on the top of the cartridge.

   

5. If the cartridge still has the orange pull-tab attached, pull to remove it.

   

6. If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.

7. 1. 

      Clogged vent

   2. With a straight pin, gently remove excess adhesive from the vent

   3. Unclogged vent

8. Turn the cartridge so that the cartridge contacts face downward, and then match the label color with the color dot on the carriage.

9. Slide the cartridge into its slot, and then gently press the cartridge down until it clicks into place.

   

10. Repeat these steps to inspect the vents on each of the cartridges.

11. Make sure that each cartridge is firmly installed in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.

12. Close the cartridge access door.

    

You can refer this HP support community for more assistance:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.