cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
dexter2help
New member
2 0 0 0
Message 1 of 2
252
Flag Post

Contact for support [edit]

HP Recommended

Hi,

 

We have a HP T1200HD MFP large format plotter with the same model scanner as well. Upon startup on the screen, we are running into this issue, "Boot from CD".

 

Does anyone know a work around with this? Picture below:

1 REPLY 1
jasonmiamifl
Level 7
880 810 37 84
Message 2 of 2
Flag Post
HP Recommended

The printer was connected to the touch screen PC &  controlled by the touch screen PC .

the error message has nothing to do with the printer .

 

You are having trouble with the HD on the touch screen PC, which prompted for boot from CD..

 

Try to reset the CMOS & pick boot from Hardisk, also make sure no cd inserted inside the drive.

Otherwise you need and new hardisk & run recovery installation , or clone the new hardisk with a working one.

 

good luck.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation