cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Macteofe
New member
1 0 0 0
Message 1 of 2
266
Flag Post

Continuos printing Hp DesignJet T1500

HP Recommended
T1500

Hello,
I have this problem, I have to disable continuous printing on my HP Designjet T1500

Plotter must not print on the second roll when finish paper with different format ( A0 - A1 )

any suggestions? 

Thanks

 

Tags (1)
1 REPLY 1
Vijay_C
Level 3
Level 3
35 35 2 2
Message 2 of 2
Flag Post
HP Recommended

To avoid printing when roll is empty, use the  put job on hold option.   See the below link to kow more.

Have also added the settings location where the options can be changed ( Doc end). 

 

https://support.hp.com/us-en/product/hp-designjet-t1500-printer-series/5365104/model/5365105/documen...

 

HP Designjet T2500 eMultifunctional Printer Series - An "on hold for paper" message

 
Based on a set of conditions that you can set when sending a job to the printer (see Paper mismatch actionPaper mismatch action), the printer will decide which of the loaded rolls of paper is more suitable to print the job. If there is no roll of paper available that meets all the conditions, the printer will put the job on hold for paper. You can manually resume the job, forcing it to print on a paper other than the one originally specified, otherwise it will stay on hold.
 
When is a job put on hold for paper?
If the paper mismatch action is set to Put job on hold (see Paper mismatch actionPaper mismatch action), a job is put on hold for paper in the following cases:
  • The paper type that has been selected by the user is not currently loaded on the specified roll—or on either of the rolls, if no roll has been specified.
  • The paper type that has been selected by the user is loaded on the specified roll, but the drawing is too large to fit on the roll—or on either of the rolls, if no roll has been specified

 

 

 

You can set the ePrinters behavior in such cases from the touch screen.

Select then then Setup > Job management options > Paper mismatch action =

Print anyway if you want such jobs to print on whatever paper is loaded. This is the default option when printing from a software application or from the Embedded Web Server; but it does not work when printing from a USB flash drive.

Select then then Setup > Job management options > Paper mismatch action =

Put job on hold if you want such jobs to be put on hold. The ePrinter will send an alert whenever a job is put on hold to the job owner.

 

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation