cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
awhplm
New member
2 0 0 0
Message 1 of 2
179
Flag Post

DesignJEt Z2100 stops printing at 55"

HP Recommended
DesignJet Z2100

Greetings,

 

I need to print numerous 36" X 72" PDF files. They preview correctly in Acrobat, but the Z2100 only prints the first 55", then spits out blank paper for the remaining 17". I've tried several different files, all with the exact same result. Tweaking the settings in Acrobat does not change the 55" cutoff point. Any suggestions?

Thanks,

 

Alan

1 REPLY 1
jasonmiamifl
Level 7
880 810 37 84
Message 2 of 2
Flag Post
HP Recommended

I recommend you try the followings :

 

Download & install the PCL driver & update it by the printer property > advance >>  update driver > have disk  >
           etc etc...  

 

make sure do not use high dpi on your image file    , try maxi 150dpi .

 

Try to use Adobe photoshop to open, edit & print that file.

 

After above steps & you might have answer.

good luck

 

 

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation