cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Kdwashburn
New member
2 1 0 0
Message 1 of 2
520
Flag Post

DesignJet T1200

HP Recommended

I have the same issue with the T1200.  I took the Formatter out, took the battery out for few minutes, put everything back together and it still has the blank screen and the flashing power button.  The LED next to 1 is blinking, while 2 and 3 are off.

1 REPLY 1
DJ_Exprt
Level 2
Level 2
29 29 1 0
Message 2 of 2
Flag Post
HP Recommended

Dear HP Customer,

 

From the description, you have provided, printer is having blank display issue. Even after you press power button, if the printer doesnt not intialise and there is no display on front panel, I would recommend you replace hard disk drive and formatter.

 

Please use only new parts as these parts contain printer information.

 

Regards,

 

Although I am an HP employee, I am speaking for myself and not for HP. --Say "Thanks" by clicking the Kudos Star in the post that helped you. --Please mark the post that solves your problem as "Accepted Solution"

I am an HP employee.
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation