• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
Designjet T520 36"

Hello,

i have a problem with my Designjet T520 36". As soon as its plugged in, it seems to start normal. Then the Display flashes a few times (2-4) in white. It Beeps 3 times and flashes one more time white. After the flash the HP Logo changes from blue to orange. Finally it displays a loading screen but it doesn't seem to to anything. My Computer recognizes the Printer. However I can't print anything.

 

What I´ve tried so far:

- Replace LCD-Ribbon cable (no effect)

- Replace LCD-Screen and the cable again, also with no effect

- Update the firmware

 

Nothing seems to help. Does anybody know whats going on there?

1 REPLY 1
HP Recommended

Hello,

 

You my also need to replace the on board ident chip:

 

https://h30434.www3.hp.com/t5/DesignJet-Large-Format-Printers-and-Digital-Press/T-520-ERROR-B35D2ACC...

 

It is a replaceable part. I would advise to check with a technician to diagnose this correctly but this part normally sorts this issue out.

Paul Elwin
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.