cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Bolo_Pitronics
New member
1 0 0 0
Message 1 of 2
783
Flag Post

Designjet T830 not initializing

HP Recommended
Designjet T830

I have a designjet T830. It has developed two different error codes which makes it not initialize at all and beeps three(3) times. The first error code was 0009-0301 which all manuals say that the scanbars have issues. I tried changing the firmware first before resorting to changing the part all together. The printer responded but the developed the error code 0009-0201 along with the three beeping sounds again. I disconnected the cables that connect the scanner motor and reconnected it and it seemed to work but it again developed a printhead error. Not detected. Reseating hasn't worked and after restarting it again goes to the 0009-0201 error. Could it be the bundle board or something.

Because the error comes as soon as the HP logo is displayed.

Please help. 

1 REPLY 1
bestoday
New member
3 2 0 0
Message 2 of 2
Flag Post
HP Recommended

Hi Bolo

Did you ever resolve this problem?

Was it the scan bars or Scan motor?

Thanks

bestoday

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation