cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
EEnglish1
New member
1 0 0 0
Message 1 of 2
241
Flag Post

Disk Read Error

HP Recommended
HP T1200HD MFP

Hi,

 

We have a HP T1200HD MFP large format plotter with the same model scanner as well. Upon startup on the screen, we are running into this issue, "Boot from CD".

 

Does anyone know a work around with this? Picture below:

 

IMG_2342.jpg

1 REPLY 1
jasonmiamifl
Level 7
880 810 37 84
Message 2 of 2
Flag Post
HP Recommended

One thing you can try.... take out the hardisk.... find a working PC with IDE connection & clone it with new hd.
not sure ok or not, bcs  not sure your hd condition.

above from inside the touch screen PC... scanner has no hd...

or

 

If you had the recovery DVD & install a new hardisk & run the recovery... you must have the touch screen with

original PC, because when running  recovery & it prompt you to touch red dot.

 

good luck...

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation