Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 2
Flag Post

Error 2.1:10 On designjet T2300

HP Recommended
designjet T2300 eMFP

Good morning everyone,

I am supriyono from Indonesia.

I got problem Error 02.1:10 On designjet T2300 eMFP, please help me

D Hook
Level 7
877 824 37 101
Message 2 of 2
Flag Post
HP Recommended

Here's what the Service Manual says:


System Error: 02.1:10
Problem Description: Problem with the Carriage PCA
Corrective action: Try the following:
1. Switch the power off from the back of the product and disconnect the power cord.
Reconnect the power cord and power on the product.
2. Check that the Trailing Cable is not damaged. Check that the Trailing Cable is correctly
connected between the Engine PCA and Carriage PCA.
3. Replace the Carriage PCA. See Carriage PCA on page 334.
4. Replace the Trailing Cable and Carriage PCA Covers.
5. Replace the Engine PCA. See EE Box on page 370.



You can download a service manual by googling "Designjet T2300 Service Manual".  


Let us know how it turns out.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation