Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 2
Flag Post

Error/Restart Loop: Error 5.1:10 on T2500

HP Recommended
HP T2500

Any suggestions on how to get a T2500 working when it keeps giving a message about Error 5.1:10, restart printer or contact HP support.  We've had this error for the 2 years we've had the machine but for the past 2 days it won't break the cycle.



Tags (1)
Level 13
7,130 7,062 558 1,025
Message 2 of 2
Flag Post
HP Recommended

05.1:10 Problems with the formatter FAN
Call agent:
▲ Use the power switch at the rear to turn off the printer, then disconnect the power cord.
Reconnect the power cord, then turn on the printer.
Service engineer:
▲ Replace the formatter


Do a google search for the service manual and look for instructions on the removal of the formatter. Now you do not need to remove to gain access to the fan on the formatter board. See if something is obstructing the movement of the fan.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation