cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Theseeker13
New member
2 1 0 0
Message 1 of 5
540
Flag Post

HP DESIGNJET T1300 fails initializing 79:04

HP Recommended

I have recently come across this error.  It doesnt pass 20% initializing before the system error.  LED 1 & 2 are lit on the formatter board.  The error is 79:04.   Any advice would be appreciated, before I go through HP for the costly repair.  Thanks in advance 

Luke

4 REPLIES 4
Repairatrooper
Level 13
Level 13
8,608 8,506 891 2,602
Message 2 of 5
Flag Post
HP Recommended

I would attempt to update the firmware before doing anything else on the machine. If firmware does not resolve, remove all supplies (cartridges and print heads), power cycle unit and insert supplies one at a time when prompted.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
ProfesoLuc
Level 2
19 18 0 4
Message 3 of 5
Flag Post
HP Recommended

 

 

hello 

I had this problem . 

I replaced the hdd 

and it worked 

 

https://www.ebay.co.uk/itm/283429883592

Was this reply helpful? Yes No
Theseeker13
Author
New member
2 1 0 0
Message 4 of 5
Flag Post
HP Recommended

Hello.  Thanks for your response.  I still have a question.  How would I go about updating if it doesnt initialize, and I can't enter diagnostic mode either.  Thanks again for your help.

Was this reply helpful? Yes No
Repairatrooper
Level 13
Level 13
8,608 8,506 891 2,602
Message 5 of 5
Flag Post
HP Recommended

Have you tried to do a file clean up on the drive?

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation