cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Astalapla
New member
4 1 0 0
Message 1 of 2
257
Flag Post

HP Latex 115 - Cyan printheads stop printing on back to back days

HP Recommended
HP Latex 115
Microsoft Windows 10 (32-bit)

Hello everyone.

I have a HP Latex 115 and I have an issue with one of my Cyan/Black printhead. The Cyan just stops shooting. I do a cleaning (or two) and then the test comes out perfectly. I then send a job and that head just doesn't shoot anything .... literally a minute after the successful test. If there anything I can do? I would hate to call for a technician and have him fix this issue in two minutes. Thank you very much for everyone's time.

EDIT: I replaced the Cyan/Black printhead (head #3) and just like magic, now the other Cyan/Black head (head #4) now does the exact same thing. The one that was replace works well now. Anyone know what could be the issue? I doubt it's a printhead problem.

JF

1 REPLY 1
skuks
Level 5
249 239 13 34
Message 2 of 2
Flag Post
HP Recommended

Have you cleaned the contacts on printhead carriage and printhead with ethyl alcohol? Try swapping the 2 printheads after cleaning...

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation