cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
FKARLONE
New member
1 0 0 0
Message 1 of 2
213
Flag Post

HP Latex 560 Crisp barcodes

HP Recommended
HP Latex 560
Microsoft Windows 10 (64-bit)

We cant get barcodes to print cleanly, if the bars on the codes are parallel to roll feed direction we get a pretty decent result, although im thinking it should be better (assuming we are getting 1200 dpi across the roll). If the bars are perpendicular to the roll feed they are unusable (assuming thats 600 dpi). Some files have the codes running in both directions so rotation of the page is not an option.

The codes are Illustrator generated PDFs and are vector.

The paper is Legacy Universal Satin 8 mil From Sanoma Graphics products.

Work flow is 18 pass 120% ink density off of caldera.

 

Reply
1 REPLY 1
skuks
Level 5
249 239 13 34
Message 2 of 2
Flag Post
HP Recommended

Most common printheads problem.. You must have best results even in 12 passes if printheads are clean,not much nozzles out and their contacts are clean like brand new heads.. Printheads must be aligned. Room conditions must be warm and not much humidity so is the paper... 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation