cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
leonehal
Level 3
33 27 1 1
Message 1 of 8
572
Flag Post

HP Latex L25500

HP Recommended
Latex L25500
Microsoft Windows 10 (64-bit)

Hello,

 

I have HP Latex 25500 printer. It is keep missing Black head or blocking Black head. I did following things.

Yellow is good all the time only Black is clocking print head

1) Replaced 5 times Yellow-Black print head with brand new.

2) I broke one print head to check if ink is coming in that or not but it is full of Black & Yellow ink.

3) Replaced Black cartridge with new date. But no luck...

4) Check pressure of air by going Service mode. All ok.

5) I check each parts in service mode & all show me result ok.

6) Flush Black ink by pulling out from carriage nozzle. Manually & from service mode. All good.

7) No air or leak in tubes.

😎 Drop detector  is also working.

9) Use worm water & soak print head. It unblock some nozzle & work good but again next day block only Black.

10) I used Isopropane, Metho. Spirit, Soap water, Amonia cleaner everything work & unblock few nozzle but next day same result.

11)All nozzles of crane type air assembly  is good.

12) Removed right side cover & check everything is working properly while printing & all good.

13) Crane assembly pushing air in print head.

14) Service station working good.

15) Changed Aerosal fan assembly with filter.

16)Change cleaning cartridge.

17) Update firmware with new.

18) Reset EROM for service menu.

19) Called HP technician & paid money.

20) Called private technician & paid money.

 

But no luck at all. All technician don't know perfect solution. Please help me if anyone know solution.

 

7 REPLIES 7
skuks
Level 5
249 247 13 34
Message 2 of 8
Flag Post
HP Recommended

if several printheads are replaced and same result - 

https://www.youtube.com/watch?v=fwOBpj9yP_I

- carriage PCA problem with one ink channel;

- white printhead cable not connecting to the right place

- faulty ink tower...

 

HP L25500 L26500 L28500 360 330 310 Z6100 Z6200 Z6800 Designjet Printer Printhead issues resetting message. Message to user
Was this reply helpful? Yes No
leonehal
Author
Level 3
33 27 1 1
Message 3 of 8
Flag Post
HP Recommended

Hi,

Thanks for reply. If problem in Print head cable it suppose to give error. It show me warning  when I start printing.

""""Print quality problem.....something like that "it you press ok it start printing without black.

I also keep side printing bars on from rip. It is printing all bar colours with print without Black.

 

It is printing beautiful just this problem only. Please help...

Was this reply helpful? Yes No
skuks
Level 5
249 247 13 34
Message 4 of 8
Flag Post
HP Recommended

Hi 🙂

check weight of printheads, if printhead is lighter - not enough ink is going into from tubes:

- take a look at ink towers (where printhead needles are going into - recently we replaced ones causing same as your case - empty PH's and only one ink is missing . When checking - all PH's weighted around 60 grams, only one was 45 grams... - in this case all checking passed OK and when cleaning was made - ink was present, but when printing - one of two colors from PH was missing...

- sometimes PIP's from ink cartridges are defecting (no need to be leaking just not pumping enough ink);

- check tubes for air...

If you're checking only one printhead so far and making tests only with it and not with another one - may be it's defective after all...

Was this reply helpful? Yes No
Cheron-Z
Retired
Retired
4,444 4,336 250 492
Message 5 of 8
Flag Post
HP Recommended

@leonehal

 

FYI.    If you are looking to dig into technical details, explore how to produce new applications or share your tips and tricks with your colleagues, the HP Latex Knowledge Center has outstanding information that can help users of this type of product. Here is the link for the HP Latex Knowledge Center. HP Latex Knowledge Center.

HP Latex Knowledge Center

I work on behalf of HP
Was this reply helpful? Yes No
leonehal
Author
Level 3
33 27 1 1
Message 6 of 8
Flag Post
HP Recommended

Hi,

Tooo many sensor in HP printer that cause all software problems & firmware problem. Just need few sensor like vinyl plotter.

Media in or end of media so printer stop

scan media

take up roll media

& temperature sensor.

 

That is what I think.

Thanks

Was this reply helpful? Yes No
Roy_Kuzmich
Level 6
217 187 21 32
Message 7 of 8
Flag Post
HP Recommended

Check that the rubber nibs are still on the Primer assy. (It looks like a Crane over top of the Carriage when the carriage is parked at the right side) 

The purpose of the primer is to help the ink flow through the Printheads with air pressure.

If any of these nibs are missing then the PH's are not being primed properly and will cause them not to push ink through.

As HP does not sell the nibs separately (they are hard to get on properly) you will have to replace the complete primer assy.

 

Good Luck,

Roy K

Was this reply helpful? Yes No
leonehal
Author
Level 3
33 27 1 1
Message 8 of 8
Flag Post
HP Recommended

Thanks Roy,

Yes I have checked last month when problem start. At that time some times getting black. All looks ok.

If rubber nib is not seating properly on Yellow-Black print head & not priming. Technically Yellow & Black both should missing because it is on same print head. I replaced several print head but only Black missing or jam ink. Yellow is absolutely good all the time. Crane assembly working fine & **bleep** is seating properly.

 

Appreciate your reply.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation