cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Abdullah82
New member
1 0 0 0
Message 1 of 3
629
Flag Post

HP T520 SCALE ERROR

HP Recommended
HP T520 DESİNGJET
Microsoft Windows 10 (64-bit)

I AM A SURVEYİNG ENGİNEER. SO THAT PRİNTİNG WİTH A SCALE İS SO İMPORTANT FOR US. 

İN A TURKİSH SURVEYİNG PROGRAM NETCAD WE TRAY TO PRİNT 305MM*7250MM BUT HP T520 İS NOT ALLOWİNG US.

İF WE PRINT 305MM*2750MM THERE İS NO PROBLEM.

AFTER 3M PRINTINGS WE CANT ARRANGE THE SİZE.

İN AUTOCAD WE TRAY PRİNT THİS DOCUMENT 305*7250 WİTH FİT TO PAPER İS GİVİNG THE DRAWİNG VERY SMALL.

BUT İF WE GİVE THE DRAWİNG 305*10000 İTS TAKİNG NEARLY NORMAL SİZE.

BEFORE WE HAVE HP T790 WE DİDNT LİVE THİS PROBLEM.

MY FRIEND HAVE HP PAGEWİDEXL 4000 PS. HE DONT LİVE THİS PROBLEM.

 

AS A RESULT

 

I THINK İN HP T520 DESIGNJET DRİVERS  THERE ARE SOME PROBLEMS MAY BE ESPECİALLY SCALEİNG FACTOR.

 

[personal information removed] 

 

01_PAPER_SIZE.jpg02_PAPER_SIZE.jpg03_PAPER_SIZE.jpg04_PAPER_SIZE.jpg05_AUTOCAD_PAPER_SIZE.jpg06_AUTOCAD_PAPER_SIZE.jpg07_AUTOCAD_PAPER_SIZE.jpg

 

 

 

 

2 REPLIES 2
jasonmiamifl
Level 7
880 810 37 84
Message 2 of 3
Flag Post
HP Recommended

HP printers were fine & can print out all nicely within their print width limitation....

 

do not expect to print wider than its width, unless you pick scale to print.... ok..

 

I google & seems your printer was 24" width. also I google for metrix conversion

305mm=12"    7250mm=285.4 inch.

 

First, check your image DPI.....     not 300dpi...      make it 120dpi...

 

on print size....   set to    350mm   (  24"  if you have 24" roll   )  x 7250mm    (  286 inch  )

 

try & print it & post result....

 

 

Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 3 of 3
Flag Post
HP Recommended

Hi,  Thanks for contact with HP Support Forum.

 

At first update the latest firmware through HP DesignJet Printer Utility.

 

Driver and Firmware: https://support.hp.com/us-en/drivers/selfservice/hp-designjet-t520-printer-series/5263079

 

N.B: Firmware Rev. depands on your printer last digit on Part Number like: CQ890A/B/C

 

1st Part1st Part2nd Part2nd Part

 

I hope that answers will support to concern adequately. Let me know! Good luck 


Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!

 

Thanks,
Rashed

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation