cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Dea2017
New member
1 0 0 0
Message 1 of 2
248
Flag Post

HPd eskjet 2545 is my wifi printer/ how to change the printer to my new wifi network. del the previ

HP Recommended
HPD1E2545
Microsoft Windows 10 (32-bit)

COULD NT CONNECT MY HP DESKJET PRINTER WIFI ENABLED TO MY NEW WIFI NETWORK.

 

HELP ME CHANGE THE NETWORK OF THE PRINTER .

1 REPLY 1
A4Apollo
Retired
Retired
17,747 17,497 1,301 2,104
Message 2 of 2
Flag Post
HP Recommended

Hi! @Dea2017, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!

 

I understand you have issues connecting your printer to the new network.

 

Don't worry I'll try to help you out.

 

Did you make any changes to your printer?

 

Please try few steps recommended below.

 

First, make sure your computer is connected to your network.

If your printer is not currently connected to your computer, connect the USB cable between the computer and the printer.

Make sure your HP printer software is installed on your computer.

If your HP printer software is installed.

Click Start -> Programs -> HP -> -> Printer Setup & Software.

Launch the Printer Software from the Start screen (using the icon for your printer model) or from the tile named for your printer.
Select (click or touch) Utilities on the top of the Printer Software screen
Select Printer Setup & Software
Select Convert a USB connected printer to Wireless
Select “Convert a USB connected printer to wireless” from Printer Setup & Software or from the Welcome Back screen from the CD.
Carefully follow the instructions on the software screens. If you see a software screen prompt instructing you to connect the USB cable and the cable is already connected, check the checkbox which says “the USB cable is already connected”, and then continue.

The software may be able to automatically retrieve your wireless settings, which includes your network name and wireless password. If the wireless settings cannot be retrieved, you will have to pick your network name from a list of detected networks in your area and manually input your wireless password.

At the end of the process, you will be instructed to remove the USB cable.

 

 

Refer this article to know more information about converting USB to wireless.

 

If the issue still persists try restoring the network to defaults and check if it helps.

 

Restore network settings to default settings. Press the Wireless button and the Cancel button from the
printer control panel at the same time, and then hold them for 5 seconds. This should restore the network to defaults.

 

Once you have restored the printer try connecting the printer to the new network and check if it works.

 

Hope this answers your query!

Have a great day! 🙂

 

Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.

 

Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!

 

A4Apollo
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation