Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 3
Flag Post

Issue with new firmware MRY_06_00_06.1 for T2500

HP Recommended
DesignJet T2500
Microsoft Windows 10 (64-bit)

I recently upgraded out T2500PS to the new MRY_06_00_06.1.fmw firware and now I have black bars across the top and on the side of all prints when printing in all black and white. Greyscale doesn't have the problem.


1) Any ideas how to fix it?


2) Any ideas where I can get a copy of the previous firmware MRY_04_06_01.1? It doesnt seem to be on their servers anywhere.

Level 7
634 609 35 85
Message 2 of 3
Flag Post
HP Recommended
No need to down grade your printer firmware.....please print on your printer internal pages from printer setting and the check print internal page..... Then check what happens. If it's printing on color you need to check with your application setting.

Please share your application name or share any snap of your printing setting....i will guide further.....
Was this reply helpful? Yes No
New member
1 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Hola también tengo un problema con el nuevo  firware MRY_06_00_06.1.fmw lo actualise y ahora imprime muy lento antes tenia la vercion que viene de fabrica mry_02_00_03.4. Sera que alguna manera de solucionarlo ya que ya no tiene el mismo rendimiento que tenía antes, tengo una t2500. Gracias...

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation