cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Kevin155
New member
1 0 0 0
Message 1 of 2
317
Flag Post

L25500 Print appears faded.

HP Recommended
Hp L25500
Microsoft Windows XP

Hi, looking for advice please...

 

My L25500 latex printer starts the job fine from cold, however, after about 500mm -1000mm of printing the saturation become poor with a little banding; giving the appearance of fading. 

 

Cancelling and restarting, the jobs starts poor and deteriorates further as the print job progresses.

 

There are no errors on screen.

 

I have cleaned the print heads, but no improvement.

 

Any advice appreciated.

 

Thanks

1 REPLY 1
1111SLV__
Level 2
Level 2
20 19 1 1
Message 2 of 2
Flag Post
HP Recommended

Hello

I invite you to use HP Latex Forum https://hplatexknowledgecenter.com/forum/printers for future questions on your HP Latex printer, it will be easier to help you form there. Regards

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation