cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
lyndonmightys
New member
1 0 0 0
Message 1 of 3
446
Flag Post

Latex 570 Printing with stripes in solid colors

HP Recommended
Latex 570
Mac OS X 10.10 Yosemite

Our Latex 570 has started Printing with stripes in solid colors, pleaase advise on how to fix this? 

2 REPLIES 2
Jesus_Loves_YOU
New member
5 5 0 0
Message 2 of 3
Flag Post
HP Recommended

First things first;  Did you try cleaning the print head?

 

Is there any debris on the print head, found by doing a physical cleaning per the manual..?

 

Is there any debris causing a minute head alighnment possibillity, i.e., from a possible previous jam..?  Along the track bar, any chatter while the head is making a pass, i.e., is the case belt snug as should be?  have you tried applying some silicone from a cloth from spary can type lubricant along the guide bar?..

 

I've never used latex 570, so I''ll ask if there is any difference in thickness..?  Change paper thickness adjustment??  Feed is aligned properly..?   So many possibles, factors and facets!!!    

 

Good Luck I hope I made a sugestion that does the trick!       Kind Regards, Mike

Was this reply helpful? Yes No
1111SLV__
Level 2
Level 2
20 19 1 1
Message 3 of 3
Flag Post
HP Recommended

Hello @lyndonmightys

Can you post your question on https://hplatexknowledgecenter.com/forum ? From there you will be able to get a better answer.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation