Printer head reinstall error

[Eknathgunjal]

Printer head reinstall error in hp e910a model 

[Raj_05]

Hi @Eknathgunjal,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

If you're encountering a "Printer head reinstall error" on an HP E910a printer model, there are several steps you can try to troubleshoot and resolve the issue.

• Restart the Printer: Sometimes, a simple restart can resolve temporary issues. Turn off the printer, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on.
• Check for Obstructions: Make sure there are no obstructions blocking the printer head or the carriage. Sometimes debris or small pieces of paper can cause issues.
• Inspect the Printer Head: Remove the printer head according to the manufacturer's instructions and inspect it for any damage or blockages. If you notice any issues, clean the printer head using a lint-free cloth and distilled water. Be careful not to touch the nozzles.
• Update Printer Firmware: Ensure that your printer's firmware is up to date. You can usually find firmware updates on the HP website or through the printer's menu settings.
• Reset the Printer: Perform a reset on the printer to clear any internal errors. The method for resetting the printer may vary, so refer to the printer's manual for instructions on how to do this.
• Check for Ink Levels: Ensure that the ink cartridges are properly installed and have sufficient ink levels. Low ink levels can sometimes trigger error messages.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support