cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
simonbutt
New member
1 0 0 0
Message 1 of 2
213
Flag Post

Setting up a Designjet T120, wired connection will not work

HP Recommended
Designjet T120

I am setting up a new Designjet T120.  I have followed the instructions as far as selecting the wired connection.  It then says "Cable not connected".  I've checked and used different cables and ports.  The Green LED on the printer network card is solid and the Orange is flashing, the same at the other end on the network switch.  Also If I try the Wireless connection instead it tells me that " wireless will not work with an ethernet cable connected to the printer......" so I think that proves it that the cable is connected. 

 

I disconnected the Ethernet cable and ran the wireless setup.  This has worked and the firmware update has started.  This is all well and good but I would prefer to run the printer wired for a number of reasons.  Do I have a faulty printer or is this a known problem?

1 REPLY 1
Repairatrooper
Level 13
Level 13
8,876 8,737 926 2,670
Message 2 of 2
Flag Post
HP Recommended

I would check the port on the computer closely and make sure no contacts are bent. If this is a new printer then I would engage HP tech support right away.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation