cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
JUKE123
New member
1 0 0 0
Message 1 of 3
427
Flag Post

WON'T PRINT

HP Recommended
1055CM PLUS
Microsoft Windows 10 (64-bit)

GOT ERROR CODE "04C300 00210000". HOW CAN I FIX THIS?

2 REPLIES 2
D Hook
Level 7
877 824 36 101
Message 2 of 3
Flag Post
HP Recommended
Was this reply helpful? Yes No
davidzuts
Level 13
7,130 7,062 558 1,025
Message 3 of 3
Flag Post
HP Recommended

The first thing you need to do is remove the network card since that is probably the only EIO card you have. Do this with the power off and then after removal turn on the plotter and see if it comes to ready. Odds are it will. If it does then it means you need to replace the network card. If you still get the error then you need to open the back and remove the hard disk inside the machine and again turn on and see if the error is gone. You can run this plotter without the internal hard disk as long as you are not using postscrpt driver.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation