Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
3 1 0 0
Message 1 of 2
Flag Post

Z2100 prints part of the image in incorrect colors

HP Recommended
Microsoft Windows 10 (64-bit)

Z2100 starts printing correctly: Colors are completely correct. Then in the middle of the print the colors are wrong. Seems to be printing with some colors missing.

Print heads are in status okay and cleaned. No error messages at all.z2100.jpg

Level 7
880 810 37 84
Message 2 of 2
Flag Post
HP Recommended

if this happened, printhead problem..print a diagnostic print & check what color missing.


you might have to replace missing color printheads , then do a printhead alignment & color calibration for

the photo paper loaded.  make sure it pass.


My Z2100 prints very beautful giclee prints, almost same as good as my Z3100 with 12 colors.




Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation