• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
designjet 510
Microsoft Windows 10 (64-bit)

can designjet 510 print more then 600 inch

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

i printed 2 times and i didnt cut paper .

At print properties, i signed disable automatic cutting+remove top/bottom blank areas+small marigins.I adjusted paper size just smaller then 15240mm but bigger then i wanted print size just 10mm . I printed first part  , after second part of print i choosed 10mm from forward which i stayed printed point. And lost area gained and printed points joined.

Dont forget that last of first print must be in empty place ( no drawing area )

 

View solution in original post

2 REPLIES 2
HP Recommended

i printed 2 times and i didnt cut paper .

At print properties, i signed disable automatic cutting+remove top/bottom blank areas+small marigins.I adjusted paper size just smaller then 15240mm but bigger then i wanted print size just 10mm . I printed first part  , after second part of print i choosed 10mm from forward which i stayed printed point. And lost area gained and printed points joined.

Dont forget that last of first print must be in empty place ( no drawing area )

 

HP Recommended

if you disable     auto cut   ... printer will not cut any media.

no matter what, you always get 0.25 inch blank... that is printer margin.....

I wish printer was smart enough to do    borderless printing....

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.