cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
amitgarg100
New member
1 0 0 1
Message 1 of 2
919
Flag Post

hp Deskjet gt 5820, not connecting to network

HP Recommended
HP Deskjet 5820
Microsoft Windows 10 (64-bit)

The printer is connecting through the USB cable and is working fine, when  i folow the oin screen instructions to  convert the usb printer to Network. 

 

following is happening. 

 

wireless setiings are retreaved from py PC, 

then after i press next after selecting. " Do you want to connect and store these settings on your printer.

 

i am getting the following message" your printer failed to join the wireless network.  

 

"Issue: The network name (SSID) you entered manually could not be found.
Solution: Check that your wireless router is powered on. When manually entering your network name (SSID), make sure you enter it exactly including upper and lower case letters and any spaces.:

 

all the settings are good, previously the same printer has worked on the same wireless network. 

 

 

Also when i press the wireless and cancil buttons together for 3 secounds, on  the printer, nothing is happning, - it says in the user manual that the "powerlighjt will blink for a few secounds, then the printer will be in setup mode(wireless light will continue to blink until the printer is connected) 

 

but none of the above is happening. 

1 REPLY 1
kichareplies
New member
3 3 0 0
Message 2 of 2
Flag Post
HP Recommended
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation