cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
LMS31
New member
1 0 0 0
Message 1 of 3
598
Flag Post

hp designjet t520 error code b39c0e14 on blue screen in startup.

HP Recommended
T520
Microsoft Windows XP (64-bit)

Hello can you help me please : hp designjet t520 error code b39c0e14 on blue screen in startup.

thank you.

2 REPLIES 2
Jorge70
Level 4
101 101 6 13
Message 2 of 3
Flag Post
HP Recommended
Maybe memory error or print head error
Was this reply helpful? Yes No
davidzuts
Level 13
7,130 7,062 558 1,025
Message 3 of 3
Flag Post
HP Recommended

Most times the issue is a bad firmware usb thumb drive mounted on the main board. They are available from hp parts for 25.00 which is the way I would first go since it is a lot cheaper then the main board which comes with the same drive.  The part number is CQ890-67105.

 

Just go to the link below and put the part number in to order.

 

https://parts.hp.com/hpparts/Default.aspx?mscssid=

 

Do a google search for the service manual and you have to remove the main pca board and on the back side is where the drive is mounted. If the drive does not work, then the complete main pca will have to be replaced as new pca's come with the drive all ready installed.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation